
|
| U S H E R I T A G E G R O U P , I N C. |
"Bringing Heritage Masonry Materials, Tools, and Techniques to the Modern Jobsite." |
|
|
|
|
|
| Heritage Natural Hydraulic Lime Heritage Stucco/Plaster |
This product is a traditional material made from 100% all-natural ingredients, and it is breathable and flexible. Hydraulic lime is distinguished from non-hydraulic lime by its ability to cure in damp/wet conditions. It it suitable for historic masonry that may be exposed to high moisture levels or extreme conditions, and it is also recommended for sustainable new-build projects and strawbale construction that relies on breathable, all-natural construction materials.
Heritage Natural Hydraulic Lime Stucco/Plaster is a dry material with aggregate preblended into the product. The product is applied in two coats: a base coat and a finish coat. This product is ready to use; just add water at the site before applying the stucco.
|
Purchase Heritage Natural Hydraulic Lime Stucco Online
|
$31.95 + S/H. (Calculated separately)
|
NOTES:
- Packaged dry in 80 lb. bags
- Preblended with coarse sand for scratch/base coat or fine sand for finish coat
- Must be shipped on pallets-UPS shipping is not available for this product. Minimum quantity is 12 bags. Shipping is not calculated when ordering online. We will contact you with shipping costs based on the freight quotes we receive or you may request to set up your own shipping arrangements.
|
Coverage |
| A two-coat application is recommended for exterior stucco work with an overall thickness of approximately 5/8” (15 mm) with a base coat 3/8” (10 mm) and a finish coat of ¼” (6 mm): |
| |
|
|
Base (scratch) coat with coarse sand |
14 sq. ft. (applied at 3/8-1/2") |
|
Finish coat blended with fine sand |
20 sq. ft (applied at 1/4") |
|
|
|
|
|
|
 |
| News & Events |
FAQs |
Policies |
About Us |
Contact Us |
Request Information |
| Copyright 2008 by U.S. Heritage Group | 3516 N. Kostner | Chicago, IL 60641 | All rights reserved |
v. 773-286-2100 | f. 773-286-1852
|
| |
|