For Architects
For Contractors
For Homeowners
FAQs
Policies
------------------------

• The AS160 is designed to cut bricks, mortar, soft sandstone, natural limestone, timber, plastics, foams, or any combination of these materials.
• Cuts masonry dry with significantly less respirable dust than disc cutters.
• Unlike disc cutters, the AS160 does not throw dust into the air, nor does it kick back.
• The AS160 is the only small, handheld saw able to cut to depths of 120 mm (using plunge blades) in masonry materials.
• The AS150 allows you to cut square corners, requiring no overcutting or bolstering.
• The AS160 enables you to cut directly into flush walls without stitch drilling

The AS160/150 is ideal for cutting brickwork and walls in established and furnished houses. Due to its ability to plunge cut to depths of 120mm, cut square corners and cut to single brick height, the AS160/150 is ideal for:

• Renovations, alterations, and building repair.
• Toothing brickwork for extensions.
• Fast removal of in-built objects such as anchors (wall plates, joists, trusses), frames, sills, beams, lintels, wall units and/or steps.
• Expansion joints or wall section replacement.
• Removal of in-built furniture, plumbing or vanities.
• Cutting of archways and windows
• Tuckpointing.
• Repairing cracked walls.

Cutting to single brick depth, and cutting square allows easy hole cutting for installations in interior or exterior walls. Use it to install:

• Vents
• Ducts
• Registers
• Plumbing
• Electrical cabling & conduit
• Electrical goods (air-conditioners, dryers, wall ovens, heaters, meter boxes, fans)
• Windows
• Recycling units
• Pass through